MASK

This Mask was designed to be 3D printed and easily assembled.

 

IMPORTANT:

THE HOMOLOGATED MASKS TO BE PROTECTED FROM COVID-19 ARE FFP2 AND FFP3.

THIS MASK IS NOT HOMOLOGATED, BUT HELPS TO PROTECT WITH ALL THE SAFETY INSTRUCTIONS GIVEN BY THE AUTHORITIES.

 

 

INSTRUCTIONS:

  1. Choose the size: S, M, L, XL or XXL.
  2. Print the mask, grid and cover.
  3. Heat the mask with a hairdryer to 50°C (120 °F). Keep the circular part intact, it’s recomended to protect with a cristal glass.
  4. When softening, bring together the upper and lower wings. CAUTION, HOT SURFACE.
  5. Heat it up again and put it on your face for final adjustments. CAUTION, HOT SURFACE
  6. Insert the filters. For example, round cotton make-up removal pad and change every 2-3 hours.
  7. Add the grid and screw the cover.
  8. Add the elastic/straps.
  9. Clean, disinfect and change filters after each use.55

 

DOWNLOADS AND CONTACT:

3D Models:   thingiverse.com/thing:4257114

E-mail:         kineticaemask@gmail.com